Brand: Clinton CLINTON, USA
Model: DC-1A/AE1A&DC-5A/AE5A
Characteristic
. a direct fire test is available for vulnerable commodities.
The test voltage range is 1KV-5KV.
It will not damage products and systems.
The Clinton Aqualytic electrode DC spark tester represents the latest spark tester technology for highly vulnerable products. The products have no mechanical contact, ultra-thin film products, foam, micro cable and insulation materials, electromagnetic layer technology without damage to the test.
The membrane switch on the display panel allows the operator to set the mode of the spark machine self-help and control how long it is triggered when a fault is detected. Relay contacts can easily connect the alarm lamp or other mechanical parts outside the panel.
The standard RS-485 serial interface can receive and respond to digital instructions. Spark test voltage can be set or verified to monitor failure counters and chain status. Many other tests can be performed by calculators or PLC. If necessary, the remote switch can reset the spark tester relay from another location.
Specifications
Voltage test range:
DC-1A/AE1A:50V-1KV DC
DC-5A/AE5A:500V-5KV DC
Voltage display: three bit red 14.2mm LED display.
Voltage accuracy: +/-0.02
Fault indication: three bit red 14.2mm LED display screen.
Output current:
DC-1A/AE1A:2 Ma
DC-5A/AE5A:1.5 Ma
Detection sensitivity:
DC-1A/AE1A:1000V was 200 a.
DC-5A/AE5A:5000V was 600 a.
Communication: RS-485 serial interface; Ethernet;
Simulation; Fieldbus
Safety: IEC-1010
Power requirements: 100-240VAC; 9-61Hz; 1A
Size diagram
