Upon receipt of an alarm signal coming from any device such as an external diameter measuring device, irregularity detector, spark tester, C monitor, joint, disconnection, etc., the distance and message of the electric wire at the time of receiving the signal are continuously printed on paper It is a device to do.
It is extremely convenient for quality control of electric wire production line.
Up to 10 messages can be input
Preset setting (forecast, full amount) to scale is possible
Scaling for counting pulses is possible
Battery backup possible for a long time, various settings such as year, month, day, hour, etc.
Date, hour, minute and lot number can be printed
By setting the correction distance of each message, it is possible to record accurate scale record
RS-232C standard equipment, ultra compact low cost
Model name | AD-500 | |
Measure function | Measure scale display | 6 digits green / red 2 color 7-segment LED |
Input | Single phase pulse / A phase B phase pulse correspondence, | |
clock for measuring scale | up / down count enabled | |
Clock | Up to 2 kPPS / 100 PPS selectable | |
pulse rate | ||
Pulse rate | Arbitrary setting in the range of 0.00001 m / pulse to 999999 m / pulse | |
Scale sensor | DC + 12V maximum 70 mA | |
power supply | ||
Event input | Number of event messages | 10 types |
Message event | Rear terminal block | |
input | ||
Reset event | Front panel switch, rear terminal block, | |
input | RS-232C | |
Print event | Front panel switch, rear terminal block, | |
input | RS-232C | |
Change message event name | Changeable | |
via RS-232C / USB memory | ||
various settings | Various parameter | Digit |
setting | setting with 6 digit green 7-segment LED | |
PRESET 1 | 6 digits (absolute value setting) | |
(full) | ||
PRESET 2 | 6 digits (Absolute value setting or | |
(forecast) | relative value setting for PRESET 1 is also acceptable) | |
Each PRESET output | Measure scale value 7 segment red display, | |
front panel LED, relay contact, RS-232C | ||
Initial set | 6 digits | |
lot number | 4 digit automatic update possible | |
Event input | By | |
distance correction | setting the correction distance of each message event, it is possible to measure more accurately | |
Printing | printer | 58 mm width 20 digit thermal system |
No recording paper output | Front panel LED, relay contact, | |
RS-232C | ||
USB | Memory controller | USB 2.0 host controller |
function | Event data save function to USB memory, | |
set value load / save function | ||
Marker output | Relay contact output, pulse width can be set in units of 1 ms in the range of 0 msec to 60000 msec | |
Clock function | Date, hour, minute | |
Battery backup | Backing up the scale, clock and various settings | |
(backup time: more than 1 month) | ||
External communication | RS-232C standard equipment | |
(baud rate 9600/19200 bps) | ||
Power supply | AC 90 to 240 V free power supply | |
50/60 Hz | ||
power consumption | 8 VA or less | |
Operating temperature | 0 to 45 ° C | |
Humidity used | 35 to 85% (no condensation) | |
shape | 144 (W) x 144 (H) x 180 (D) [mm] | |
(DIN size compliant) | ||
weight | About 2.8 kg | |